Gantry positioning machine is designed on the basis of our LMH gantry welding machine. This gantry welding equipment is designed for light pole flange positioning. The gantry is welded by structural profiles, stress released after welding by heat treatment. The traveling device of this gantry positioning machine is controlled by PLC through servo motors. The two positioning arms can move up and down, left and right on linear guide rails. The remote control box is on one side of the gantry, easy for operation. The cables are collected by drag chain. The speed of arms and gantry is controlled by Schneider inverter.
Specifications
Rail span: 3000mm
Rail length: 14mtrs
Gantry height (from rail to gantry bottom): 2000mm
Positioning arm elevating stroke: 1500mm
Machine travel speed: 3000mm/min
Travel servo motor: 0.4kW *2 (driving at both sides)
Arm elevating speed: 800mm/min
Arm elevating motor: 0.18kW*2 (solo/dual control)
Arm horizontal travel speed: 2000mm/min
Arm horizontal travel motor: 0.18kW*2 (solo/dual control)
