Welding Positioner for Vessle Head Our Welding positioner is designed rotate round or tubular work pieces such as flanges and pipes through 360 degrees to allow a welder to stand in one position and constantly work on a level surface. This prevents worker fatigue and increases productivity since the welder does not need to constantly move around the pipe to complete the weld. This method of work piece presentation also tends to ensure consistently high quality welds since no overhead or vertical runs are involved. Joining pipes or attaching pipe fittings such as flanges and valves is a problematic task from an execution perspective due to the 360-degree work plane. Without the use of a tool such as the welding positioner, the artisan may have to constantly move around and under the pipe to complete the joint, which is not conducive to good quality welding. In particular, this causes fatigue, is time consuming, and requires vertical and overhead welding runs with frequent interruptions for re-positioning.  Product Details Our positioners have following features:1. Slewing bearing structure2. Schneider inverter3. Siemens/Omron/CHNT electrical components4. Remote control with 5m cables / Wireless Remote Control5. Foot panel6. Limited Switches to prevent over-run7. Standard chuck one piece for each set. 8. CE & ISO approved Parameters: -Turning Capacity @90o: 10000kg-Max gravity at loading capacity: 700mm-Max eccentric at loading capacity: 300mm-Rotating speed: 0.05-0.5rpm-Rotating range: unlimited 360o-Rotating motor power: 2.2kw-Tilting speed: 0.35rpm-Tilt range: 0-110o (0o-  horizontal position, 90o-vertical position)-Tilt motor power: 3kw-Table size: ɸ22000mm -Table tilt stroke: for Max 3m diameter job.